11 years experience in plant design and construction
Common choice of 1875 sets of steel structure buildingsNational service hotline:
0757-81002668
11 years experience in plant design and construction
Common choice of 1875 sets of steel structure buildingsNational service hotline:
0757-81002668Color plate
Product Features
LYSAGHT TRIMDEK® is our most cost effective roofing and walling profile. It is available in both convex and concave pre-curved sheets, to meet architectural features.
* Self-drilling installation. Fasteners at the crest of the ribs for roofing, and at the valley of the ribs for walling;
* Overlapping side ribs are designed to prevent the capillary entry of water;
* Compatible coated fasteners available to give equivalent service life of the system;
* The panels manufactured from Clean COLORBOND® pre-painted G550 steel or ZINCALUME® unpainted G550 steel; 
* Appealing architectural appearance and multiple-colour choice;
Schematic
|
Technical Specifications | ||
|
TCT(mm) |
0.47 |
0.53 |
|
Coverage (mm) |
760 |
975 |
|
Rib Height (mm) |
29 |
30 |
|
Maximum Recommended Support Spacing in Non Cyclonic Areas | ||
|
Roof Application | ||
|
* Single Span (mm) |
1000 |
1400 |
|
* End Span (mm) |
1200 |
1600 |
|
* Internal Span |
1700 |
2000 |
|
Wall Application | ||
|
* Single Span (mm) |
1600 |
1700 |
|
* End Span (mm) |
1800 |
1900 |
|
* Internal Span |
2200 |
2300 |
|
| ||
|
For cyclonic ares data, please contact technical department | ||
|
Minimum Recommended Roof Pitch |
3°(1/20 or 5%) | |
|
Minimum Curved Radius |
500mm | |
|
Coating Mass |
150g/m2 | |
|
Yield Strength |
550MPa | |
|
Meets Australian Standard |
AS1397-2001 AS/NZS 2728-2007 | |
Tel