Hainan steel gas cutting process should pay attention to the main points

(1) before the Hainan steel gas cutting gas cutting system must check that the entire equipment and tools are all working properly, and ensure safety.
(2) steel gas cutting Hainan should select the correct process parameters. Adjusting the shape of the cutting should be good oxygen jets, to achieve and maintain a clean cut, high winds and shoot a long line force.
(3) before the gas cutting steel Hainan should remove dirt, oil and steel surface rust and other debris, and to stay below a certain space, in order to facilitate slag blowing.
(4) When Hainan steel gas cutting, tempering must be prevented.
(5) In order to prevent deformation of gas cutting, the operation should be short side. To cut small pieces, after cutting large. First cut complex after cutting simple.